Question 1

How long does wooden worktop sanding and restoration take?

Accepted Answer

Most wooden worktop restorations are completed in a single day. The timeline depends on the worktop's size, the extent of damage, whether the sink or hob needs temporarily removing, and the finish type chosen. We'll give you a clear time estimate before we start.

Question 2

How much does wooden worktop sanding cost?

Accepted Answer

Wooden worktop sanding and oiling typically costs between £200 and £600 for a standard kitchen, depending on size, condition and finish. This is a fraction of the cost of a new worktop — a solid oak replacement can cost £500–£2,000+ just for the wood, plus fitting.

Question 3

What types of wood do you work with?

Accepted Answer

We work with all hardwood worktop species including oak, walnut, beech, ash, maple, iroko, mahogany and bamboo. We also restore teak, pine and hardwood butcher's block worktops. If you're unsure of your wood type, send us a photo and we'll advise.

Question 4

Can you repair scratches, water rings and burn marks?

Accepted Answer

Yes — scratches, water rings (white staining), dark water damage, burn marks, dents and gouges can all be repaired as part of the restoration process. We sand back to clean wood and re-finish, leaving an invisible result in most cases.

Question 5

How often should wooden worktops be re-oiled?

Accepted Answer

In everyday use, wooden worktops benefit from re-oiling every 6–12 months. Around the sink area, more frequent treatment helps prevent water ingress and darkening. A professional restoration every few years will significantly extend the life of your worktop.

Question 6

Do I need to empty the kitchen before you arrive?

Accepted Answer

You don't need to clear the whole kitchen — just make sure items are cleared from the worktop surface and the immediate area around it. We protect the rest of the kitchen during the sanding process using professional dust extraction equipment, which greatly reduces airborne dust.

Question 7

What's the difference between oiling and sealing a wooden worktop?

Accepted Answer

Oiling penetrates the wood, nourishing and protecting from within — it gives a natural-looking finish and is easily re-applied at home. Sealing (with lacquer, hardwax oil or polyurethane) creates a surface film that offers stronger protection against water and staining, but needs professional re-application when it wears. We'll advise the best option for your worktop and how you use it.

Question 8

Do you cover wooden worktop restoration near me?

Accepted Answer

We cover London, Surrey, Kent, Sussex, Hampshire and Berkshire. We have dedicated service pages for London, Surrey, Kent, Sussex, Croydon and Sutton. Call us on 0330 043 1621 or send a photo of your worktop and we'll confirm availability and provide a free quote.

Question 9

Can I sand and oil my wooden worktop myself?

Accepted Answer

You can, but professional sanding delivers far superior results. DIY sanding often leaves uneven surfaces, visible scratch marks and missed spots. Our technicians use professional dust-extraction equipment and multi-stage sanding to achieve a perfectly smooth, even finish that's difficult to replicate at home. We also apply oil evenly and correctly to avoid sticky patches and ensure full protection.

Question 10

Why is my wooden worktop sticky after oiling?

Accepted Answer

A worktop becomes sticky when excess oil is left on the surface instead of being absorbed and buffed off. This happens when oil is applied too thickly or not wiped back properly. Our professional oiling process applies the correct amount of oil, allows it to penetrate, then buffs the surface dry — leaving a smooth, non-sticky, water-resistant finish that brings out the natural grain.

Question 11

What grit sandpaper is used for sanding wooden worktops?

Accepted Answer

We use a multi-stage sanding process, typically starting at 80–120 grit to remove damage and old finish, then progressing through 150, 180 and up to 240 grit for a silky-smooth finish. The progression through finer grits is essential — jumping straight to a fine grit leaves deeper scratches visible. Professional equipment ensures an even, consistent sand across the entire surface.

Question 12

What oil is best for wooden worktops?

Accepted Answer

We use premium food-safe worktop oils including Osmo Top Oil, Danish oil and pure tung oil depending on the wood species and your preferences. These penetrate the wood to nourish and protect from within, are water-resistant, and bring out the natural grain beautifully. We'll recommend the best oil for your specific worktop and how you use your kitchen.

Question 13

Can you sand burn marks and water stains out of a wooden worktop?

Accepted Answer

Yes — burn marks from hot pans, white water rings, dark water stains and even deep scratches can all be sanded out and the surface refinished. We sand back to clean, undamaged wood and re-oil to a flawless finish. In most cases the result is completely invisible with no trace of the original damage.

Oak Worktop Sanding & Oiling Near You

Revitalise Your Kitchen Worktops

Wooden Worktop Services

Wooden Worktop Sanding & Refinishing

Wooden Worktop Oiling & Sealing

Wooden Worktop Repairs

Epoxy Coatings

Polyurethane Finishes

Before & After: Real Wooden Worktop Restorations

Don't Replace — Restore Your Worktops Today

Wooden Worktop Restoration Pricing Guide

Signs Your Wooden Worktop Needs Professional Restoration

Frequently Asked Questions

Find Wooden Worktop Sanding & Oiling Near You

Related Services